VeloGrip™ — Secure Your Phone Through Every Jolt, Brake & Backroad
Keep Your Phone Secure Over Every Bump, Brake & Backroad
If you've burned through three flimsy mounts this year, VeloGrip™ is the final stop. Dual-layer magnets grip firmly through OtterBox-thick cases, and the 11 lbs vacuum base locks onto your dashboard so you can finally set it and forget it.
Quit Fishing Your Phone Out of the Footwell at Every Stoplight
You hit a pothole, the phone slides — now you’re scrambling in traffic and missing exits. Vent clips break. Suction cups detach in hot weather. Weak magnets fail the moment you add a case. The mounts you’ve been buying aren’t made for how you actually drive.
➤ Holds Through Thick Cases — Not Just Bare Glass: Dual-layer neodymium magnets pull strong enough to grip your phone through rugged cases with a metal plate inside, so you don’t need to strip it down each time.
➤ 11 lbs Vacuum Base That Won't Quit Even in Heat: A twist-lock vacuum seal — not cheap sticky tape — clings to your dashboard with 11 lbs of grip. Twist to lock, twist to unlock. No sticky mess, no peeling.
➤ Three-Axis Fold for Every Viewing Angle: 180° at the head, 360° at the stem, 180° at the base. Portrait mode for Maps, landscape for CarPlay, low profile when parked — adjust it one-handed in no time.
How VeloGrip™ Keeps Grip When Other Mounts Slip
Two systems working in tandem. Dual-layer magnets combine forces from both sides of the contact ring, so the hold on your phone strengthens as forces shift during turns — never weakens. Below, a twist-lock vacuum seal traps air between base and dashboard, anchoring the whole mount with 11 lbs of suction.
It’s the gap between a phone holder made for a stationary desk and one designed for potholes, speed bumps, and 65 mph on-ramps. Set it once. Drive as usual. Stop worrying.
Why Drivers Who’ve Gone Through Five Mounts Finally Stopped Buying Them
"I ordered this expecting to return it. I use a thick wallet case and every magnet mount I tried just failed. Six weeks later, VeloGrip™ hasn’t moved once — not even on the gravel roads to my parents’ place." — Marcus T.
"My old suction mount popped off my windshield in 95° heat last August. Switched to this on the dash — it’s held strong through two summers now. No peeling, no sliding."
— Dana R.
Hands on the Wheel. Eyes on the Road. Phone Exactly Where You Left It.
✓ Snap and Twist with One Hand: Place your phone on the magnetic ring, twist to your preferred angle, and go. No clamping, no fiddling — no need for both hands.
✓ Designed to Hold Through Potholes and Sudden Stops: Magnets and vacuum lock tighter with every jolt. Tried and tested on gravel roads and urban potholes alike.
✓ Aluminum Alloy Core Built to Outlive Your Phone: CNC-machined aluminum joints with ABS plastic casing — no weak plastic ball joints that snap in winter.
Three Steps to a Mount You’ll Never Replace
Step 1: Clean your dashboard or windshield — a dry, dust-free surface lets the vacuum base reach its full 11 lbs suction.
Step 2: Press the base firmly down and turn the dial to “TIGHT” until the vacuum locks in place. You’ll feel it hold on.
Step 3: Snap your phone onto the magnetic ring, fold and swivel to your angle, and drive as usual.
| VeloGrip™ 360° Magnetic Mount | $12 Vent Clips & Suction Mounts | Cup Holder / Loose on Seat |
|---|---|---|
| Secures your phone through thick cases using dual-layer magnets | ❌ Slips with anything beyond a slim case | ❌ Slides into the footwell every stop |
| 11 lbs twist-lock vacuum base — no peeling adhesives | ❌ 3M tape lifts off in summer heat | ❌ No secure hold at all |
| Three-axis fold allows any portrait or landscape angle, one-handed | ❌ Two or three fixed angles, needs both hands | ❌ Forces you to look down, not ahead |
Specs That Count Before You Buy
- Build: CNC-machined aluminum alloy joints, ABS plastic shell
- Vacuum Base Pull Force: 11 lbs (twist-lock seal)
- Magnet System: Dual-layer neodymium ring
- Phone Compatibility: Fits 4.7" to 7" devices (works through most cases with included metal plate)
- Rotation: 360° stem, 180° head, 180° base
- Color: Black or Silver
Common Questions Drivers Ask Before Adding to Cart
Will the suction hold on a hot dashboard in summer?
Yes — this is a twist-lock vacuum seal, not 3M sticky tape, so heat won’t cause peeling. Drivers confirm solid hold through 95°+ summer temperatures. If grip loosens, a quick wipe on the suction pad refreshes the seal.
Will it hold my phone with a thick OtterBox or wallet case?
Absolutely. The dual-layer magnets grip strongly through most rugged cases. For extra-thick or non-metallic cases, the included metal plate attaches inside your case or on your phone’s back for a solid hold.
Will the magnets interfere with my phone or wireless charging?
No. The magnets form a closed field that holds your phone without disrupting GPS, calls, or battery life. Wireless charging works as usual when your phone is off the mount.
Will it stick to a curved or textured dashboard?
It adheres best to flat, smooth surfaces — clean glass windshields, hard plastic dash panels, center consoles. Textured leather or fabric dashboards aren’t compatible with the vacuum base.
How do I remove it without leaving residue?
Twist the dial to “LOOSE” — the vacuum seal releases and the base lifts off cleanly. No tape, glue, or sticky residue left behind.
If VeloGrip™ Slips Once, You Get Every Cent Back
Install it. Use it for 60 days. If the magnets drop your phone or the vacuum base lets go on a flat dashboard — we’ll refund you entirely. We’re confident because we know what’s holding it all together.
Original: $34.99
-70%$34.99
$10.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Keep Your Phone Secure Over Every Bump, Brake & Backroad
If you've burned through three flimsy mounts this year, VeloGrip™ is the final stop. Dual-layer magnets grip firmly through OtterBox-thick cases, and the 11 lbs vacuum base locks onto your dashboard so you can finally set it and forget it.
Quit Fishing Your Phone Out of the Footwell at Every Stoplight
You hit a pothole, the phone slides — now you’re scrambling in traffic and missing exits. Vent clips break. Suction cups detach in hot weather. Weak magnets fail the moment you add a case. The mounts you’ve been buying aren’t made for how you actually drive.
➤ Holds Through Thick Cases — Not Just Bare Glass: Dual-layer neodymium magnets pull strong enough to grip your phone through rugged cases with a metal plate inside, so you don’t need to strip it down each time.
➤ 11 lbs Vacuum Base That Won't Quit Even in Heat: A twist-lock vacuum seal — not cheap sticky tape — clings to your dashboard with 11 lbs of grip. Twist to lock, twist to unlock. No sticky mess, no peeling.
➤ Three-Axis Fold for Every Viewing Angle: 180° at the head, 360° at the stem, 180° at the base. Portrait mode for Maps, landscape for CarPlay, low profile when parked — adjust it one-handed in no time.
How VeloGrip™ Keeps Grip When Other Mounts Slip
Two systems working in tandem. Dual-layer magnets combine forces from both sides of the contact ring, so the hold on your phone strengthens as forces shift during turns — never weakens. Below, a twist-lock vacuum seal traps air between base and dashboard, anchoring the whole mount with 11 lbs of suction.
It’s the gap between a phone holder made for a stationary desk and one designed for potholes, speed bumps, and 65 mph on-ramps. Set it once. Drive as usual. Stop worrying.
Why Drivers Who’ve Gone Through Five Mounts Finally Stopped Buying Them
"I ordered this expecting to return it. I use a thick wallet case and every magnet mount I tried just failed. Six weeks later, VeloGrip™ hasn’t moved once — not even on the gravel roads to my parents’ place." — Marcus T.
"My old suction mount popped off my windshield in 95° heat last August. Switched to this on the dash — it’s held strong through two summers now. No peeling, no sliding."
— Dana R.Hands on the Wheel. Eyes on the Road. Phone Exactly Where You Left It.
✓ Snap and Twist with One Hand: Place your phone on the magnetic ring, twist to your preferred angle, and go. No clamping, no fiddling — no need for both hands.
✓ Designed to Hold Through Potholes and Sudden Stops: Magnets and vacuum lock tighter with every jolt. Tried and tested on gravel roads and urban potholes alike.
✓ Aluminum Alloy Core Built to Outlive Your Phone: CNC-machined aluminum joints with ABS plastic casing — no weak plastic ball joints that snap in winter.
Three Steps to a Mount You’ll Never Replace
Step 1: Clean your dashboard or windshield — a dry, dust-free surface lets the vacuum base reach its full 11 lbs suction.
Step 2: Press the base firmly down and turn the dial to “TIGHT” until the vacuum locks in place. You’ll feel it hold on.
Step 3: Snap your phone onto the magnetic ring, fold and swivel to your angle, and drive as usual.
| VeloGrip™ 360° Magnetic Mount | $12 Vent Clips & Suction Mounts | Cup Holder / Loose on Seat |
|---|---|---|
| Secures your phone through thick cases using dual-layer magnets | ❌ Slips with anything beyond a slim case | ❌ Slides into the footwell every stop |
| 11 lbs twist-lock vacuum base — no peeling adhesives | ❌ 3M tape lifts off in summer heat | ❌ No secure hold at all |
| Three-axis fold allows any portrait or landscape angle, one-handed | ❌ Two or three fixed angles, needs both hands | ❌ Forces you to look down, not ahead |
Specs That Count Before You Buy
- Build: CNC-machined aluminum alloy joints, ABS plastic shell
- Vacuum Base Pull Force: 11 lbs (twist-lock seal)
- Magnet System: Dual-layer neodymium ring
- Phone Compatibility: Fits 4.7" to 7" devices (works through most cases with included metal plate)
- Rotation: 360° stem, 180° head, 180° base
- Color: Black or Silver
Common Questions Drivers Ask Before Adding to Cart
Will the suction hold on a hot dashboard in summer?
Yes — this is a twist-lock vacuum seal, not 3M sticky tape, so heat won’t cause peeling. Drivers confirm solid hold through 95°+ summer temperatures. If grip loosens, a quick wipe on the suction pad refreshes the seal.
Will it hold my phone with a thick OtterBox or wallet case?
Absolutely. The dual-layer magnets grip strongly through most rugged cases. For extra-thick or non-metallic cases, the included metal plate attaches inside your case or on your phone’s back for a solid hold.
Will the magnets interfere with my phone or wireless charging?
No. The magnets form a closed field that holds your phone without disrupting GPS, calls, or battery life. Wireless charging works as usual when your phone is off the mount.
Will it stick to a curved or textured dashboard?
It adheres best to flat, smooth surfaces — clean glass windshields, hard plastic dash panels, center consoles. Textured leather or fabric dashboards aren’t compatible with the vacuum base.
How do I remove it without leaving residue?
Twist the dial to “LOOSE” — the vacuum seal releases and the base lifts off cleanly. No tape, glue, or sticky residue left behind.
If VeloGrip™ Slips Once, You Get Every Cent Back
Install it. Use it for 60 days. If the magnets drop your phone or the vacuum base lets go on a flat dashboard — we’ll refund you entirely. We’re confident because we know what’s holding it all together.
