RoadEase™ — Position Your Tablet Right Between Both Headrests for Comfortable Backseat Viewing
Mount Your Tablet Right in the Middle of the Backseats — Stop the Backseat Battles Before They Start
Two kids, one tablet, four hours en route to grandma’s. You know how this story ends. RoadEase™ attaches to both backseat headrests simultaneously and positions your tablet perfectly centered — so neither child has to lean, stretch, or fight for a view. Both get a clear screen. Both stay peaceful. You actually finish your podcast.
Say Goodbye to Single-Headrest Mounts That Wobble and Drop at Every Bump
Most backseat holders grip just one headrest and call it a day. One kid gets a clear view, the other stretches over, complains, or kicks the seat. Then a pothole hits and the whole setup swings sideways. RoadEase™ uses two arms that fasten to both headrest posts at once — keeping the screen centered and firmly locked so both kids can watch the same show without tussling for control.
➤ Positions Dead-Center Between Both Backseat Headrests: Clamp two arms onto both headrest rods simultaneously, letting the tablet hover in the middle aisle — both kids get a direct line of sight without leaning or quarreling over screen orientation.
➤ Keeps the Screen Rock-Solid Over Every Bump: The dual anchor design, combined with sturdy aluminum arms and silicone-lined pads, eliminates the wobble that single-arm mounts can’t handle. No more pausing the movie because the screen spun out of view on uneven roads.
➤ Fits Phones Up to 12.9″ iPad Pro — Case On: Spring-loaded clamps hold devices from 4.7″ up to 12.9″, even with a thick kid-proof case. No scratched edges, no slipping during bumps, no case removal hassle.
How RoadEase™ Stays Firm While the Car Rocks and Rolls
Unlike most mounts that hang from a single headrest like a flag, RoadEase™ spans both headrests with a horizontal aluminum bar and hangs the tablet from a telescoping arm adjustable from 6 to 27 cm, featuring a 360° ball joint at the device. That second anchor point stops the mount from swaying in turns — and prevents the screen from ending up facing the ceiling mid-drive.
Internal gear hinges lock your angle perfectly — no sagging, slipping, or drooping during the movie. Silicone pads hold the headrest rods securely without scratching leather, and rubber-lined clamp jaws ensure even a slim iPad inside a bulky kid case holds tight without any rattling.
Why Road-Trip Parents Give Up on Everything Else
After burning through three $20 single-arm mounts that failed on their first long haul, families stop experimenting. RoadEase™ is the one that endures bumps, fits an iPad with the kid case still on, and provides both backseat riders a flat, shared view of the screen.
"Bought cheaper mounts twice — both sagged or broke within a month. This has survived two summer road trips and daily yanks from my 4-year-old. Wish I'd gotten it sooner." — Megan R.
"Was doubtful it’d fit both headrests in my Highlander. It did, took 30 seconds, and the kids haven't argued over the tablet since." — Daniel K.
Hands-Free Backseat Viewing That’s Gentle on Their Necks
✓ Both Kids Watch Without Stretching or Turning: Center placement means no neck aches, no “put it on my side” fights, and no craning for four hours straight.
✓ Stays Solid on Rough, Bumpy Roads: Two anchor points plus locked gear hinges keep the screen stable even if the car isn’t.
✓ Snaps Off When the Backseat’s Unoccupied: Quick-release knobs let you fold it down or remove it so the backseat returns to normal.
Set Up in Less Than a Minute — No Tools, No Instructions
Step 1: Attach the two clamp brackets to your backseat headrest rods. Twist the knobs until they’re tight — no tools or headrest removal needed.
Step 2: Extend the lower arm and angle it downward so the tablet sits right at your kids’ eye level. Lock the joint firmly.
Step 3: Snap your phone, tablet, or iPad into the spring-loaded grip. Rotate it portrait or landscape on the 360° ball joint and hit play.
| Why RoadEase™ | Single-Arm Headrest Mounts | Kids Holding Devices |
|---|---|---|
| Spans Both Headrests to center the tablet for both kids | ❌ Mounts on one side — other kid leans over | ❌ Whoever holds it decides where it goes |
| Steady as a Rock on Rough Roads — dual clamps plus gear-locked hinges | ❌ Wobbles and droops over every bump | ❌ Dropped tablet, cracked screen risks |
| Fits 4.7″–12.9″ Devices with Cases — from phones to iPad Pro | ❌ Usually maxes out near 10″, no cases | ❌ Arms tire out quickly |
Specifications: What's Under the Hood
- Build: Aluminum-alloy arms, ABS clamp body, silicone-lined headrest pads, rubber-lined device jaws
- Folded Dimensions: 10.8 × 5.0 × 2.2 inches — fits in a glove box
- Lower-Arm Extension: 2.4 to 10.6 inches, for tuning the height to short or tall kids
- Headrest Rod Spacing Fit: 0.4 to 6.3 inches apart (fits most sedans, SUVs, and pickups)
- Device Range: 4.7″ to 12.9″ — phones, mini tablets, full-size tablets, with most kid cases on
- Weight Capacity: Up to 10 kg / 22 lbs
Questions? We've Got You Covered
Will this fit my car’s headrests?
It clamps to headrest rods spaced between 0.4 and 6.3 inches apart, covering most sedans, SUVs, and pickups. If your car has fixed headrests without exposed rods (like some Volvo models), this mount won’t fit.
Will it hold my 12.9″ iPad Pro with the kid case still on?
Yes. The spring-loaded jaws open wide to 12.9″ and the rubber lining grips bulky kid cases securely without slipping. No need to remove the case before every trip.
Will it really hold steady on bumpy roads?
That’s the beauty of the dual-headrest system. Two anchor points plus internal gear hinges prevent swaying, sagging, or sideways rotation—unlike single-arm mounts—even on rough highway patches.
Does it block the driver’s rearview sightline?
The lower arm telescopes from 6 to 27 cm — position the screen low enough to stay beneath the rearview mirror line. You adjust the height so your view stays clear.
Do I need any tools or help to install?
No tools needed. Just twist the two knobs, clamp it on, and snap the tablet in place. Takes under a minute, with no headrest removal or instructions required.
Put It to the Test on Your Next Road Trip — Or Return It Risk-Free
If RoadEase™ doesn’t keep your tablet perfectly steady throughout your next trip, or fails to fit both your backseat headrests as promised, send it back for a full refund. With aluminum arms, gear-locked hinges, and a 10 kg load limit, it’s built tough to outlast the kid who tugs on it — but if it doesn’t earn its place in your glove box, you owe nothing.
Original: $29.99
-70%$29.99
$9.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Mount Your Tablet Right in the Middle of the Backseats — Stop the Backseat Battles Before They Start
Two kids, one tablet, four hours en route to grandma’s. You know how this story ends. RoadEase™ attaches to both backseat headrests simultaneously and positions your tablet perfectly centered — so neither child has to lean, stretch, or fight for a view. Both get a clear screen. Both stay peaceful. You actually finish your podcast.
Say Goodbye to Single-Headrest Mounts That Wobble and Drop at Every Bump
Most backseat holders grip just one headrest and call it a day. One kid gets a clear view, the other stretches over, complains, or kicks the seat. Then a pothole hits and the whole setup swings sideways. RoadEase™ uses two arms that fasten to both headrest posts at once — keeping the screen centered and firmly locked so both kids can watch the same show without tussling for control.
➤ Positions Dead-Center Between Both Backseat Headrests: Clamp two arms onto both headrest rods simultaneously, letting the tablet hover in the middle aisle — both kids get a direct line of sight without leaning or quarreling over screen orientation.
➤ Keeps the Screen Rock-Solid Over Every Bump: The dual anchor design, combined with sturdy aluminum arms and silicone-lined pads, eliminates the wobble that single-arm mounts can’t handle. No more pausing the movie because the screen spun out of view on uneven roads.
➤ Fits Phones Up to 12.9″ iPad Pro — Case On: Spring-loaded clamps hold devices from 4.7″ up to 12.9″, even with a thick kid-proof case. No scratched edges, no slipping during bumps, no case removal hassle.
How RoadEase™ Stays Firm While the Car Rocks and Rolls
Unlike most mounts that hang from a single headrest like a flag, RoadEase™ spans both headrests with a horizontal aluminum bar and hangs the tablet from a telescoping arm adjustable from 6 to 27 cm, featuring a 360° ball joint at the device. That second anchor point stops the mount from swaying in turns — and prevents the screen from ending up facing the ceiling mid-drive.
Internal gear hinges lock your angle perfectly — no sagging, slipping, or drooping during the movie. Silicone pads hold the headrest rods securely without scratching leather, and rubber-lined clamp jaws ensure even a slim iPad inside a bulky kid case holds tight without any rattling.
Why Road-Trip Parents Give Up on Everything Else
After burning through three $20 single-arm mounts that failed on their first long haul, families stop experimenting. RoadEase™ is the one that endures bumps, fits an iPad with the kid case still on, and provides both backseat riders a flat, shared view of the screen.
"Bought cheaper mounts twice — both sagged or broke within a month. This has survived two summer road trips and daily yanks from my 4-year-old. Wish I'd gotten it sooner." — Megan R.
"Was doubtful it’d fit both headrests in my Highlander. It did, took 30 seconds, and the kids haven't argued over the tablet since." — Daniel K.
Hands-Free Backseat Viewing That’s Gentle on Their Necks
✓ Both Kids Watch Without Stretching or Turning: Center placement means no neck aches, no “put it on my side” fights, and no craning for four hours straight.
✓ Stays Solid on Rough, Bumpy Roads: Two anchor points plus locked gear hinges keep the screen stable even if the car isn’t.
✓ Snaps Off When the Backseat’s Unoccupied: Quick-release knobs let you fold it down or remove it so the backseat returns to normal.
Set Up in Less Than a Minute — No Tools, No Instructions
Step 1: Attach the two clamp brackets to your backseat headrest rods. Twist the knobs until they’re tight — no tools or headrest removal needed.
Step 2: Extend the lower arm and angle it downward so the tablet sits right at your kids’ eye level. Lock the joint firmly.
Step 3: Snap your phone, tablet, or iPad into the spring-loaded grip. Rotate it portrait or landscape on the 360° ball joint and hit play.
| Why RoadEase™ | Single-Arm Headrest Mounts | Kids Holding Devices |
|---|---|---|
| Spans Both Headrests to center the tablet for both kids | ❌ Mounts on one side — other kid leans over | ❌ Whoever holds it decides where it goes |
| Steady as a Rock on Rough Roads — dual clamps plus gear-locked hinges | ❌ Wobbles and droops over every bump | ❌ Dropped tablet, cracked screen risks |
| Fits 4.7″–12.9″ Devices with Cases — from phones to iPad Pro | ❌ Usually maxes out near 10″, no cases | ❌ Arms tire out quickly |
Specifications: What's Under the Hood
- Build: Aluminum-alloy arms, ABS clamp body, silicone-lined headrest pads, rubber-lined device jaws
- Folded Dimensions: 10.8 × 5.0 × 2.2 inches — fits in a glove box
- Lower-Arm Extension: 2.4 to 10.6 inches, for tuning the height to short or tall kids
- Headrest Rod Spacing Fit: 0.4 to 6.3 inches apart (fits most sedans, SUVs, and pickups)
- Device Range: 4.7″ to 12.9″ — phones, mini tablets, full-size tablets, with most kid cases on
- Weight Capacity: Up to 10 kg / 22 lbs
Questions? We've Got You Covered
Will this fit my car’s headrests?
It clamps to headrest rods spaced between 0.4 and 6.3 inches apart, covering most sedans, SUVs, and pickups. If your car has fixed headrests without exposed rods (like some Volvo models), this mount won’t fit.
Will it hold my 12.9″ iPad Pro with the kid case still on?
Yes. The spring-loaded jaws open wide to 12.9″ and the rubber lining grips bulky kid cases securely without slipping. No need to remove the case before every trip.
Will it really hold steady on bumpy roads?
That’s the beauty of the dual-headrest system. Two anchor points plus internal gear hinges prevent swaying, sagging, or sideways rotation—unlike single-arm mounts—even on rough highway patches.
Does it block the driver’s rearview sightline?
The lower arm telescopes from 6 to 27 cm — position the screen low enough to stay beneath the rearview mirror line. You adjust the height so your view stays clear.
Do I need any tools or help to install?
No tools needed. Just twist the two knobs, clamp it on, and snap the tablet in place. Takes under a minute, with no headrest removal or instructions required.
Put It to the Test on Your Next Road Trip — Or Return It Risk-Free
If RoadEase™ doesn’t keep your tablet perfectly steady throughout your next trip, or fails to fit both your backseat headrests as promised, send it back for a full refund. With aluminum arms, gear-locked hinges, and a 10 kg load limit, it’s built tough to outlast the kid who tugs on it — but if it doesn’t earn its place in your glove box, you owe nothing.
