RoadEase™ — Position Your Tablet Perfectly Centered Between Headrests for Comfortable Backseat Viewing
Mount Your Tablet Between the Backseats — End the Battles Before You Hit the Road
Two kids, one tablet, and a four-hour trip to grandma’s. You know exactly how that story ends. RoadEase™ secures to both backseat headrests simultaneously and suspends your tablet right in the center — so neither child has to lean, twist, or fight for a view. Both seats enjoy a clear screen. Both stay peaceful. You finally finish your podcast.
Quit Accepting Shaky Single-Headrest Holders That Bounce at Every Bump
Most backseat mounts attach to just one headrest and call it a day. One kid gets a perfect view. The other leans over, complains, kicks the seat. Then a pothole hits and the mount swings wildly. RoadEase™ secures with two arms gripping both headrest posts simultaneously — the screen sits centered, locked tight, letting both kids watch the same show without the struggle.
➤ Positioned Dead-Center Between Both Backseat Headrests: Dual arms clamp onto each headrest rod simultaneously, suspending the tablet in the central aisle — both kids enjoy a face-on view with no leaning or side disputes.
➤ Keeps the Screen Rock-Solid Over Every Bump: Two anchor points combined with aluminum arms and silicone pads eliminate wobble that single-arm mounts can’t. No more pausing movies because the screen swung out of sight on rough roads.
➤ Accommodates Phones up to 12.9″ iPad Pro — Case Included: Spring-loaded clamps hold devices from 4.7″ up to 12.9″ even with a sturdy kid case attached. No scratched edges, no slipping during bumps, no wrestling the case off each time.
How RoadEase™ Locks While Your Car Moves
Most tablet mounts hang from one headrest like a flag on a pole. RoadEase™ instead connects both headrests with a horizontal aluminum bar, then extends the tablet down on a 6–27 cm telescoping arm with a 360° ball joint at the holder. This second anchor stops sway during turns — so the screen never ends up facing the ceiling mid-trip.
Internal gear hinges hold your chosen angle exactly — no sagging, creeping, or drooping in the middle of a movie. Silicone grips protect the headrest rods from scratches, and rubber-lined clamp jaws keep even a slim iPad inside a thick kid case firmly locked with zero rattling.
Why Road-Trip Parents Give Up on Everything Else
After wasting money on three $20 single-arm mounts that failed on the first long trip, families stop guessing. RoadEase™ is the reliable one that handles bumps, fits iPads with cases on, and delivers a flat screen view for both backseat riders simultaneously.
"Bought cheap mounts twice — both sagged or broke within weeks. This one survived two summer trips and daily yanking from my 4-year-old. Wish I’d bought it sooner." — Megan R.
"Doubted it would fit both headrests in my Highlander. It did, took just 30 seconds to install, and now the kids haven’t fought over the tablet once." — Daniel K.
Hands-Free Backseat Viewing Without the Neck Strain
✓ Both Kids Watch Without Leaning or Twisting: Centered placement means no neck strain, no disputes over screen position, and no one twisting sideways for hours.
✓ Remains Stable on Rough Roads and Bumpy Joints: Two anchor points plus gear-locked hinges keep the screen steady even when the car jolts.
✓ Quick Detach When Not Hauling Kids: Releases in 30 seconds with a knob — fold it away or remove it so the backseat stays just a backseat.
Setup Takes Less Than a Minute — Zero Tools, Zero Instructions
Step 1: Clamp the two anchor brackets onto your backseat headrest rods. Twist the knobs until secure — no tools or headrest removal required.
Step 2: Extend the lower arm and tilt it down so the tablet aligns with your kids' eye level. Lock the hinge.
Step 3: Snap your phone, iPad, or tablet into the spring-loaded holder. Rotate portrait or landscape on the 360° ball joint and start watching.
| Why RoadEase™ | Single-Arm Headrest Mounts | Letting Kids Hold It |
|---|---|---|
| Spans Both Headrests positioning the tablet perfectly centered for both children | ❌ Mounted on one side — second kid leans over | ❌ Whoever holds it decides the view |
| Solid as a Rock on Rough Roads — thanks to dual anchors and gear hinges | ❌ Swings and sags with every bump | ❌ Tablet dropped, cracked screen |
| Fits 4.7″–12.9″ Devices with Cases Attached — from phones up to iPad Pro size | ❌ Usually maxes at 10″ without cases | ❌ Arms tire within 15 minutes |
Specifications: What's Under the Hood
- Build: Aluminum-alloy arms, ABS clamp body, silicone-lined headrest pads, rubber-lined device jaws
- Folded Dimensions: 10.8 × 5.0 × 2.2 inches — fits in a glove box
- Lower-Arm Extension: 2.4 to 10.6 inches, for tuning the height to short or tall kids
- Headrest Rod Spacing Fit: 0.4 to 6.3 inches apart (fits most sedans, SUVs, and pickups)
- Device Range: 4.7″ to 12.9″ — phones, mini tablets, full-size tablets, with most kid cases on
- Weight Capacity: Up to 10 kg / 22 lbs
Questions? We've Got You Covered
Will it fit my car's headrests?
It clamps onto headrest rods spaced between 0.4 and 6.3 inches, fitting most sedans, SUVs, and pickups. If your vehicle has fixed headrests without exposed rods (like some Volvo models), this mount won’t fit.
Will it hold my iPad Pro 12.9″ with the kid case still on?
Yes. The spring-loaded clamps open up to 12.9″ and the rubber lining grips bulky kid cases securely. No need to remove the case before every trip.
Will it really stay put on rough roads?
That’s the advantage of the dual-headrest design. Two anchor points plus internal gear hinges prevent sway, sagging, or side rotation that single-arm mounts often suffer — even on rough highway joints.
Does it block the driver’s rearview?
The lower arm extends from 6 to 27 cm — position the screen low enough to stay beneath the rearview mirror line. You control the height, so your sightline remains clear.
Need tools or installation help?
Nope. Twist the two knobs, clamp it on, snap your tablet in. Done in under a minute, no headrest removal, no reading required.
Test It on Your Next Road Trip — Or Return It
If RoadEase™ doesn’t keep your tablet steady throughout your journey, or fails to fit both backseat headrests as promised, send it back for a full refund. With aluminum arms, gear-locked hinges, and a 10 kg load rating, it’s built to endure even the most persistent kid tugs — but if it can’t earn its place in your glove compartment, you don’t pay.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Mount Your Tablet Between the Backseats — End the Battles Before You Hit the Road
Two kids, one tablet, and a four-hour trip to grandma’s. You know exactly how that story ends. RoadEase™ secures to both backseat headrests simultaneously and suspends your tablet right in the center — so neither child has to lean, twist, or fight for a view. Both seats enjoy a clear screen. Both stay peaceful. You finally finish your podcast.
Quit Accepting Shaky Single-Headrest Holders That Bounce at Every Bump
Most backseat mounts attach to just one headrest and call it a day. One kid gets a perfect view. The other leans over, complains, kicks the seat. Then a pothole hits and the mount swings wildly. RoadEase™ secures with two arms gripping both headrest posts simultaneously — the screen sits centered, locked tight, letting both kids watch the same show without the struggle.
➤ Positioned Dead-Center Between Both Backseat Headrests: Dual arms clamp onto each headrest rod simultaneously, suspending the tablet in the central aisle — both kids enjoy a face-on view with no leaning or side disputes.
➤ Keeps the Screen Rock-Solid Over Every Bump: Two anchor points combined with aluminum arms and silicone pads eliminate wobble that single-arm mounts can’t. No more pausing movies because the screen swung out of sight on rough roads.
➤ Accommodates Phones up to 12.9″ iPad Pro — Case Included: Spring-loaded clamps hold devices from 4.7″ up to 12.9″ even with a sturdy kid case attached. No scratched edges, no slipping during bumps, no wrestling the case off each time.
How RoadEase™ Locks While Your Car Moves
Most tablet mounts hang from one headrest like a flag on a pole. RoadEase™ instead connects both headrests with a horizontal aluminum bar, then extends the tablet down on a 6–27 cm telescoping arm with a 360° ball joint at the holder. This second anchor stops sway during turns — so the screen never ends up facing the ceiling mid-trip.
Internal gear hinges hold your chosen angle exactly — no sagging, creeping, or drooping in the middle of a movie. Silicone grips protect the headrest rods from scratches, and rubber-lined clamp jaws keep even a slim iPad inside a thick kid case firmly locked with zero rattling.
Why Road-Trip Parents Give Up on Everything Else
After wasting money on three $20 single-arm mounts that failed on the first long trip, families stop guessing. RoadEase™ is the reliable one that handles bumps, fits iPads with cases on, and delivers a flat screen view for both backseat riders simultaneously.
"Bought cheap mounts twice — both sagged or broke within weeks. This one survived two summer trips and daily yanking from my 4-year-old. Wish I’d bought it sooner." — Megan R.
"Doubted it would fit both headrests in my Highlander. It did, took just 30 seconds to install, and now the kids haven’t fought over the tablet once." — Daniel K.
Hands-Free Backseat Viewing Without the Neck Strain
✓ Both Kids Watch Without Leaning or Twisting: Centered placement means no neck strain, no disputes over screen position, and no one twisting sideways for hours.
✓ Remains Stable on Rough Roads and Bumpy Joints: Two anchor points plus gear-locked hinges keep the screen steady even when the car jolts.
✓ Quick Detach When Not Hauling Kids: Releases in 30 seconds with a knob — fold it away or remove it so the backseat stays just a backseat.
Setup Takes Less Than a Minute — Zero Tools, Zero Instructions
Step 1: Clamp the two anchor brackets onto your backseat headrest rods. Twist the knobs until secure — no tools or headrest removal required.
Step 2: Extend the lower arm and tilt it down so the tablet aligns with your kids' eye level. Lock the hinge.
Step 3: Snap your phone, iPad, or tablet into the spring-loaded holder. Rotate portrait or landscape on the 360° ball joint and start watching.
| Why RoadEase™ | Single-Arm Headrest Mounts | Letting Kids Hold It |
|---|---|---|
| Spans Both Headrests positioning the tablet perfectly centered for both children | ❌ Mounted on one side — second kid leans over | ❌ Whoever holds it decides the view |
| Solid as a Rock on Rough Roads — thanks to dual anchors and gear hinges | ❌ Swings and sags with every bump | ❌ Tablet dropped, cracked screen |
| Fits 4.7″–12.9″ Devices with Cases Attached — from phones up to iPad Pro size | ❌ Usually maxes at 10″ without cases | ❌ Arms tire within 15 minutes |
Specifications: What's Under the Hood
- Build: Aluminum-alloy arms, ABS clamp body, silicone-lined headrest pads, rubber-lined device jaws
- Folded Dimensions: 10.8 × 5.0 × 2.2 inches — fits in a glove box
- Lower-Arm Extension: 2.4 to 10.6 inches, for tuning the height to short or tall kids
- Headrest Rod Spacing Fit: 0.4 to 6.3 inches apart (fits most sedans, SUVs, and pickups)
- Device Range: 4.7″ to 12.9″ — phones, mini tablets, full-size tablets, with most kid cases on
- Weight Capacity: Up to 10 kg / 22 lbs
Questions? We've Got You Covered
Will it fit my car's headrests?
It clamps onto headrest rods spaced between 0.4 and 6.3 inches, fitting most sedans, SUVs, and pickups. If your vehicle has fixed headrests without exposed rods (like some Volvo models), this mount won’t fit.
Will it hold my iPad Pro 12.9″ with the kid case still on?
Yes. The spring-loaded clamps open up to 12.9″ and the rubber lining grips bulky kid cases securely. No need to remove the case before every trip.
Will it really stay put on rough roads?
That’s the advantage of the dual-headrest design. Two anchor points plus internal gear hinges prevent sway, sagging, or side rotation that single-arm mounts often suffer — even on rough highway joints.
Does it block the driver’s rearview?
The lower arm extends from 6 to 27 cm — position the screen low enough to stay beneath the rearview mirror line. You control the height, so your sightline remains clear.
Need tools or installation help?
Nope. Twist the two knobs, clamp it on, snap your tablet in. Done in under a minute, no headrest removal, no reading required.
Test It on Your Next Road Trip — Or Return It
If RoadEase™ doesn’t keep your tablet steady throughout your journey, or fails to fit both backseat headrests as promised, send it back for a full refund. With aluminum arms, gear-locked hinges, and a 10 kg load rating, it’s built to endure even the most persistent kid tugs — but if it can’t earn its place in your glove compartment, you don’t pay.
