PulseFin™ — Replace Your Ugly Whip Antenna with the Sleek Factory Shark-Fin Style
Park Beside Any New Audi Without Looking Like You’re Stuck in the Past
If your factory antenna looks as twisted as a worn-out coat hanger after countless washes, PulseFin™ is your 60-second rescue. A stick-on shark fin with a hidden copper coil keeps your AM/FM signal crystal clear, finished to look factory, never aftermarket. It matches the sleek silhouette of the latest BMWs, Audis, and Mercs straight from the showroom.
Fed Up with That Antenna Sticking Out Like a Sore Thumb?
The old rubber whip bends at every wash, whistles fiercely at highway speeds, and instantly dates your ride when a newer model pulls up. Short replacements still look cheap. PulseFin™ sits flush, survives car washes, and gives your roofline that shark-fin shape it was meant to have.
➤ Genuine Shark-Fin Profile: Sleek, low-drag shell in your choice of carbon fibre, gloss black, ivory white, or nickel silver — looks OEM, not slapped on.
➤ Keeps Signal Reception Pristine: Integrated copper coil and pass-through cable connect to your existing antenna port, preserving AM/FM/DAB and GPS signals without interference.
➤ Quick, No-Fuss Installation: Heavy-duty 3M adhesive bonds firmly to a clean roof and stands strong through wind, rain, snow, and pressure washes — no drilling, tools, or clips required.
SmartSignal™ Coil — How PulseFin™ Maintains Your AM/FM Reception
Most decorative shark fins are hollow plastic — stick one on and your radio dies. PulseFin™ includes an internal copper SmartSignal™ coil plus a pass-through cable that plugs directly into your existing antenna socket.
In other words: you keep your original AM/FM/DAB and GPS reception and gain the stylish look you actually wanted. That’s the whole point.
Drivers Done with Their Old Whip Antenna — and Finally Upgraded
Mark T., 41, drives a 2013 Golf and was fed up with his antenna looking stuck in the 90s. “Slapped it on in the driveway, plugged the cable in, and the radio worked just like before. It looks like it came from the factory. Took me five minutes.” His friends noticed it the next weekend and asked where he got it.
What You Actually Get When You Fit One
✓ A Roofline That Looks Years Younger: Say goodbye to the bent whip and cheap stubby — your car finally suits its era.
✓ Quieter Highway Drives: The aerodynamic shell slashes the wind whistle common with whip antennas at 70+ mph — you’ll hear the difference on your next long trip.
✓ A Five-Minute Upgrade, Done at Home: Clean the spot, peel, plug, press. No workshop visit, no tools needed.
Stick It On in 4 Simple Steps — From Driveway to Done
Step 1: Clean and dry the roof area thoroughly — any wax or dirt will weaken the bond.
Step 2: Remove your old whip antenna and set it aside.
Step 3: Connect the PulseFin™ cable to the antenna socket you just freed.
Step 4: Peel off the 3M backing, position the fin, press firmly for 30 seconds. That’s it — switch the radio on.
| PulseFin™ | Old Whip Antenna | Cheap Stick-On Fins |
|---|---|---|
| Factory shark-fin profile with 4 finish options | ❌ | ❌ |
| Internal copper coil & pass-through cable maintains AM/FM clarity | ✓ | ❌ |
| 3M-grade adhesive base — stays put through car washes and harsh winters | ❌ | ❌ |
| Eliminates wind whistle at motorway speed | ❌ | ❌ |
The Specs
- Material: Premium ABS plastic shell with carbon-fibre or gloss finish
- Colours: Carbon Fibre Black, Deep Black, Ivory White, Nickel Silver
- Signal Support: Internal copper SmartSignal™ coil with pass-through cable for AM/FM, DAB and GPS
- Fit: Universal — works on sedans, hatchbacks, SUVs and most pickups with a flat or slightly curved roof spot
- Installation: 3M-grade adhesive base, no drilling, no tools
The Top Questions Before You Click Buy
Will this fit my car for sure?
Absolutely — PulseFin™ is universal. It sticks to any flat or mildly curved roof spot (sedans, hatchbacks, SUVs, most pickups). The cable connects to the standard antenna socket your whip currently uses.
Will it come off in a car wash or harsh winter?
No chance. The 3M-grade adhesive bonds permanently once applied to a clean, dry surface. It's tested against rain, snow, freezing temps, and pressure washes.
Will it affect my radio signal?
Not at all — that’s the point of the cable. Unlike hollow decorative caps, PulseFin™ includes an internal copper coil and pass-through cable that plugs into your antenna socket, preserving AM/FM, DAB, and GPS reception as before.
No tools needed, really?
Exactly — just unscrew your old whip by hand (most cars) then wipe, peel, plug, and press. Done in five minutes flat.
Which colour's best for me?
Carbon Fibre Black and Deep Black suit nearly every car shade. Ivory White matches white and silver cars. Nickel Silver pairs well with grey, silver, and metallic finishes.
Hit the Road Tomorrow Looking Like You Should Have All Along
Install your PulseFin™ this weekend, and next time you park beside that brand-new Audi, your roofline will stand tall. If it doesn’t fit or fails to stick, we’ll refund every cent.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Park Beside Any New Audi Without Looking Like You’re Stuck in the Past
If your factory antenna looks as twisted as a worn-out coat hanger after countless washes, PulseFin™ is your 60-second rescue. A stick-on shark fin with a hidden copper coil keeps your AM/FM signal crystal clear, finished to look factory, never aftermarket. It matches the sleek silhouette of the latest BMWs, Audis, and Mercs straight from the showroom.
Fed Up with That Antenna Sticking Out Like a Sore Thumb?
The old rubber whip bends at every wash, whistles fiercely at highway speeds, and instantly dates your ride when a newer model pulls up. Short replacements still look cheap. PulseFin™ sits flush, survives car washes, and gives your roofline that shark-fin shape it was meant to have.
➤ Genuine Shark-Fin Profile: Sleek, low-drag shell in your choice of carbon fibre, gloss black, ivory white, or nickel silver — looks OEM, not slapped on.
➤ Keeps Signal Reception Pristine: Integrated copper coil and pass-through cable connect to your existing antenna port, preserving AM/FM/DAB and GPS signals without interference.
➤ Quick, No-Fuss Installation: Heavy-duty 3M adhesive bonds firmly to a clean roof and stands strong through wind, rain, snow, and pressure washes — no drilling, tools, or clips required.
SmartSignal™ Coil — How PulseFin™ Maintains Your AM/FM Reception
Most decorative shark fins are hollow plastic — stick one on and your radio dies. PulseFin™ includes an internal copper SmartSignal™ coil plus a pass-through cable that plugs directly into your existing antenna socket.
In other words: you keep your original AM/FM/DAB and GPS reception and gain the stylish look you actually wanted. That’s the whole point.
Drivers Done with Their Old Whip Antenna — and Finally Upgraded
Mark T., 41, drives a 2013 Golf and was fed up with his antenna looking stuck in the 90s. “Slapped it on in the driveway, plugged the cable in, and the radio worked just like before. It looks like it came from the factory. Took me five minutes.” His friends noticed it the next weekend and asked where he got it.
What You Actually Get When You Fit One
✓ A Roofline That Looks Years Younger: Say goodbye to the bent whip and cheap stubby — your car finally suits its era.
✓ Quieter Highway Drives: The aerodynamic shell slashes the wind whistle common with whip antennas at 70+ mph — you’ll hear the difference on your next long trip.
✓ A Five-Minute Upgrade, Done at Home: Clean the spot, peel, plug, press. No workshop visit, no tools needed.
Stick It On in 4 Simple Steps — From Driveway to Done
Step 1: Clean and dry the roof area thoroughly — any wax or dirt will weaken the bond.
Step 2: Remove your old whip antenna and set it aside.
Step 3: Connect the PulseFin™ cable to the antenna socket you just freed.
Step 4: Peel off the 3M backing, position the fin, press firmly for 30 seconds. That’s it — switch the radio on.
| PulseFin™ | Old Whip Antenna | Cheap Stick-On Fins |
|---|---|---|
| Factory shark-fin profile with 4 finish options | ❌ | ❌ |
| Internal copper coil & pass-through cable maintains AM/FM clarity | ✓ | ❌ |
| 3M-grade adhesive base — stays put through car washes and harsh winters | ❌ | ❌ |
| Eliminates wind whistle at motorway speed | ❌ | ❌ |
The Specs
- Material: Premium ABS plastic shell with carbon-fibre or gloss finish
- Colours: Carbon Fibre Black, Deep Black, Ivory White, Nickel Silver
- Signal Support: Internal copper SmartSignal™ coil with pass-through cable for AM/FM, DAB and GPS
- Fit: Universal — works on sedans, hatchbacks, SUVs and most pickups with a flat or slightly curved roof spot
- Installation: 3M-grade adhesive base, no drilling, no tools
The Top Questions Before You Click Buy
Will this fit my car for sure?
Absolutely — PulseFin™ is universal. It sticks to any flat or mildly curved roof spot (sedans, hatchbacks, SUVs, most pickups). The cable connects to the standard antenna socket your whip currently uses.
Will it come off in a car wash or harsh winter?
No chance. The 3M-grade adhesive bonds permanently once applied to a clean, dry surface. It's tested against rain, snow, freezing temps, and pressure washes.
Will it affect my radio signal?
Not at all — that’s the point of the cable. Unlike hollow decorative caps, PulseFin™ includes an internal copper coil and pass-through cable that plugs into your antenna socket, preserving AM/FM, DAB, and GPS reception as before.
No tools needed, really?
Exactly — just unscrew your old whip by hand (most cars) then wipe, peel, plug, and press. Done in five minutes flat.
Which colour's best for me?
Carbon Fibre Black and Deep Black suit nearly every car shade. Ivory White matches white and silver cars. Nickel Silver pairs well with grey, silver, and metallic finishes.
Hit the Road Tomorrow Looking Like You Should Have All Along
Install your PulseFin™ this weekend, and next time you park beside that brand-new Audi, your roofline will stand tall. If it doesn’t fit or fails to stick, we’ll refund every cent.
