PeelPro™ — Strip Old Paint Off Metal, Wood & Car Panels in Minutes | Brush Included
Stop Sanding. Spray It On, Wait, and Wipe the Old Paint Right Off
That hand-me-down dresser, the faded car panel, the rusty gate—PeelPro™ soaks into old paint, varnish, and stains and loosens them in about 5–10 minutes, so you wipe the gunk away instead of grinding it off by hand. Brush it on, wait, lift it off. No power sander, no dead arm by lunchtime.
Why a Garage Full of Old Paint Jobs Finally Feels Doable
✅ Skip the Hours of Sanding: Brush it on, wait 5–10 minutes, and the paint loosens enough to wipe off—so a job that used to eat your whole Saturday gets done before lunch.
✅ Works on Wood, Metal, Plastic & Car Panels: One can handles the dresser, the gate, and the faded hood—no buying a different stripper for every surface.
✅ Comes With Its Own Brush: The applicator brush is in the box, so you lay down an even coat and reach into corners and trim from the first minute.
See the Old Paint Bubble and Lift—No Scraping for an Hour Straight
Brush on an even coat, wait 5–10 minutes, then wipe or rinse it clean. The paint bubbles and softens so it comes away in sheets instead of stubborn flakes. Deck rails, car parts, thrift-store finds—back to bare surface faster than scraping by hand.
"I figured I'd still end up sanding like every other stripper I've tried—nope. Brushed it on the old paint on my truck fender, came back ten minutes later, and it just wiped right off down to metal." — Darren K.
| PeelPro™ | Other Brands | |
|---|---|---|
| ✔️ Lifts Paint in 5–10 Minutes | ✅ | ❌ |
| ✔️ Works on Wood, Metal & Car Panels | ✅ | ❌ |
| ✔️ Brush Applicator Included | ✅ | ❌ |
| ✔️ No Sanding or Power Tools Needed | ✅ | ❌ |
Get Back to Bare Wood and Metal Without the Backbreaking Work
• Even Coat From the First Pass: The included brush lays the stripper down evenly so it works on the whole surface at once, not just the easy flat spots.
• Lifts Layered Paint: Built-up coats may need a second pass, but most jobs wipe clean after one 5–10 minute soak—no grinding through layer after layer.
• Simple Wipe-Off Cleanup: After it soaks, wipe or rinse the softened paint away. No baked-on flakes, no scrubbing the same spot twenty times.
Frequently Asked Questions
A: About 5–10 minutes. Brush on an even coat, let it soak, then wipe or rinse the softened paint away. Thick, built-up layers may need a second pass.
A: Wood, metal, plastic, and painted car panels—furniture, gates, fenders, and DIY projects. Always test a small hidden spot first on anything delicate or valuable.
A: Use it outdoors or in a well-ventilated area and keep it away from open flame—the label lists it as flammable and an eye/skin irritant, so wear gloves and eye protection and follow the safety directions on the can.
A: It's made to lift paint, varnish, and stains rather than eat into the base material, but strip times vary—test a hidden area first and don't leave it on longer than needed.
A: Your PeelPro™ paint stripper (100ml per can) and an applicator brush, so you can start the moment it arrives.
Strip It Clean or Get Your Money Back
Brush on PeelPro™, give it 5–10 minutes, and if the old paint doesn't lift off your wood, metal, or car panel the way it should, send it back for a full refund. Worst case, you keep the brush.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Stop Sanding. Spray It On, Wait, and Wipe the Old Paint Right Off
That hand-me-down dresser, the faded car panel, the rusty gate—PeelPro™ soaks into old paint, varnish, and stains and loosens them in about 5–10 minutes, so you wipe the gunk away instead of grinding it off by hand. Brush it on, wait, lift it off. No power sander, no dead arm by lunchtime.
Why a Garage Full of Old Paint Jobs Finally Feels Doable
✅ Skip the Hours of Sanding: Brush it on, wait 5–10 minutes, and the paint loosens enough to wipe off—so a job that used to eat your whole Saturday gets done before lunch.
✅ Works on Wood, Metal, Plastic & Car Panels: One can handles the dresser, the gate, and the faded hood—no buying a different stripper for every surface.
✅ Comes With Its Own Brush: The applicator brush is in the box, so you lay down an even coat and reach into corners and trim from the first minute.
See the Old Paint Bubble and Lift—No Scraping for an Hour Straight
Brush on an even coat, wait 5–10 minutes, then wipe or rinse it clean. The paint bubbles and softens so it comes away in sheets instead of stubborn flakes. Deck rails, car parts, thrift-store finds—back to bare surface faster than scraping by hand.
"I figured I'd still end up sanding like every other stripper I've tried—nope. Brushed it on the old paint on my truck fender, came back ten minutes later, and it just wiped right off down to metal." — Darren K.
| PeelPro™ | Other Brands | |
|---|---|---|
| ✔️ Lifts Paint in 5–10 Minutes | ✅ | ❌ |
| ✔️ Works on Wood, Metal & Car Panels | ✅ | ❌ |
| ✔️ Brush Applicator Included | ✅ | ❌ |
| ✔️ No Sanding or Power Tools Needed | ✅ | ❌ |
Get Back to Bare Wood and Metal Without the Backbreaking Work
• Even Coat From the First Pass: The included brush lays the stripper down evenly so it works on the whole surface at once, not just the easy flat spots.
• Lifts Layered Paint: Built-up coats may need a second pass, but most jobs wipe clean after one 5–10 minute soak—no grinding through layer after layer.
• Simple Wipe-Off Cleanup: After it soaks, wipe or rinse the softened paint away. No baked-on flakes, no scrubbing the same spot twenty times.
Frequently Asked Questions
A: About 5–10 minutes. Brush on an even coat, let it soak, then wipe or rinse the softened paint away. Thick, built-up layers may need a second pass.
A: Wood, metal, plastic, and painted car panels—furniture, gates, fenders, and DIY projects. Always test a small hidden spot first on anything delicate or valuable.
A: Use it outdoors or in a well-ventilated area and keep it away from open flame—the label lists it as flammable and an eye/skin irritant, so wear gloves and eye protection and follow the safety directions on the can.
A: It's made to lift paint, varnish, and stains rather than eat into the base material, but strip times vary—test a hidden area first and don't leave it on longer than needed.
A: Your PeelPro™ paint stripper (100ml per can) and an applicator brush, so you can start the moment it arrives.
Strip It Clean or Get Your Money Back
Brush on PeelPro™, give it 5–10 minutes, and if the old paint doesn't lift off your wood, metal, or car panel the way it should, send it back for a full refund. Worst case, you keep the brush.
